Kinex Cappers, bottle capping machine manufacturer

Kinex™ Bottle Capper Machines
Efficient · Versatile· Reliable · Ergonomic

KINEX™ Bottle
Capping Machines


As seen on... as seen on CBS
CBS Sunday Morning News

Shamus Jones

Below is a link to a CBS Sunday Morning News story that focuses on the success of Shamus Jones and the company that he started, Brooklyn Brine. Brooklyn Brine has been a customer of Kinex Cappers since 2010.

Here is what Shamus has to say about his SA-2000 Kinex Capping Machine:

The SA-2000 Capping Machine from Kinex has been the biggest game changer for our production crew. Our wrists can only thank Kinex and crew for their great innovation and customer service.

Shamus Jones, Brooklyn Brine
Brooklyn, NY USA

Here is the link: (Our favorite part is the 40-42 second mark when the SA Capping Machine makes its brief but powerful appearance)


More Testimonials

We recently purchased a PumpCap Capping Machine from Kinex Cappers and I must say this machine is amazing. I am the production supervisor for the color division so my testimony is hands on. It truly is a money and time saver. The machine has saved us 60% in labor costs for the application that we are using this machine for, which by any manufacturing standards is beyond exceptional. The PumpCap replaced three people that now I can utilize elsewhere. A 60 percent savings in labor is amazing. And in today's manufacturing world, that's what we all strive for. The set-up time for changing bottle sizes is literally just a few minutes. Air only, no electricity which simplifies the machine’s operation. If a bottle capper is needed in your operations, you cannot, by any means, go wrong by purchasing one of these machines from Kinex Cappers. It is truly a remarkable little workhorse.

Wayne Finlay, Thorworks Industries
Sandusky, Ohio, USA

We are a global diagnostic device manufacturer, and in our San Diego facility, currently operate multiple shifts in order to produce a wide array of products. Our annual production quantities are in the tens of millions of units and continues to grow, so it’s important for us to utilize resources very efficiently. We recently expanded our product offering to include a family of devices with numerous components packaged in bottles of various sizes. Very soon after starting production, two primary issues became clear – Operator fatigue from repetitive motion and Cap Torque consistency. These were both solved immediately by using an SA-2000 Capping Machine on our production Floor. The flexibility and robustness of the design has allowed us to use a single setup for multiple products, and the monitoring results show that our process can now be considered highly capable statistically. We are extremely happy with the overall experience as far as the Product Quality, Ease of Use and Overall Value!

Craig Merrill, Sekisui Diagnostics
San Diego, California, USA

To all at Kinex,

Just wanted to drop a note to let you all know what a joy it is to work with you guys. I couldn’t be more impressed with the sales experience as well as the products that I have purchased. I have purchased a variety of pneumatic capping machines from you including the PumpCap, an SA BenchTop, and handheld PS Capping Machines. The equipment design, build and quality are all first class!

Thanks again to all the Kinex team!

Danny Stoner, PRADCO Outdoor Brands
Fort Smith, Arkansas, USA

We have been using your cap-screwing machine (the SA-2000 benchtop) for over a year and a half, and I can say that we appreciate it very much. It was purchased primarily to alleviate the physical impact of screwing our 70 mm caps manually, and it has met the challenge admirably. It is easy to use and it looks good.

Nous utilisons depuis un an et demi votre machine à visser les couvercles (le modèle d’établi SA-2000), et je peux dire que nous l'apprécions énormément. Je l'avais achetée dans le but de nous soulager du vissage manuel de nos couvercles de 70 mm, et elle atteint très bien son objectif. Elle est facile à utiliser et elle est belle.

Marc Paré, Société de Marie, Mère de l'Église
St-Joachim-de-Shefford, Quebec, Canada

We specialize in medium to large run liquid manufacturing with multiple large custom machines. Since our model switched to more larger sized bottles and applications, instead of getting new $100k+ machines, we decided to go with SA Benchtop Capping Machine. One of the smartest decisions ever. These machines run almost as fast as our large custom capping machines with only one operator. With just one call, Kinex Cappers knew exactly what I needed and in less than 1 week we had our new machine up and running & making us money. Amazing machine and outstanding customer service. I never have to look anywhere else for any of my capping needs. Thanks again Kinex!

Steven Mazurek, Eclipse Liquids
Aliso Viejo, California, USA

As a humble owner of a small operation, our goal is to reach out and please all our customers. And by running a smooth operation, the supply would be able to meet the demand or even more. To achieve this feat, machinery would have to been implemented to ease the strain on our employees.

For example, I purchased a no name capper online. The price was cheap for the amazing features it claimed to accomplish. But upon receiving it, problems upon problems began to mount and take its toll on my employees affecting production time. The final straw occurred when the motor finally gave out after a couple months.

After doing some research, I came upon the Kinex Cappers PS Pneumatic Capper. And of course I was skeptical about the amazing testimonials that people have written. I called customer service and spoke with Shannon who answered ALL my questions with the utmost respect. Confidently, I purchased the capper and immediately utilized it in my production.

The capper exceeded the expectations of myself and employees as it performed beyond its specifications. Thank you Kinex for eliminating one more headache in the world of business.

Steve K., Stimulus Eliquids
Los Angeles, California, USA

I want to express my gratitude and thanks to your team. Any time someone from my company has called with a question they have been treated with courtesy, friendliness, and efficiency! As a business owners, I know excellent customer service sets a company apart from others. Please pass along my compliments to your team.

Thank you again and have a blessed week.

Patricia Pendleton, Olde Tyme Remedies, LLC, Unker's Therapeutic Products
Upton, Wyoming, USA

Our company was just starting out in manufacturing and we were tightening bottles by hand when we came across Kinex Cappers. We purchased the PS-100 Capping Machine and it works so well we purchased a second unit in 2010. We have since grown quite a bit but after all these years, we still use the PS-100’s. We definitely got our money’s worth and more. Your employees and your equipment represent your company very well. Everyone we have spoken to at Kinex Cappers throughout the years has provided us nothing less than excellent service. I would highly recommend your company and products.

Leo Simpson, Kleen Concepts
Scottsdale, Arizona, USA

Sunja's Oriental Foods has been in business for over twenty years. I believe that we have dealt with Kinex for over ten of those years and our experiences with Kinex have been outstanding. When we grew enough to upgrade to a capper, Kinex tailored our SA capping machine to our specific needs and instructed us on how we were to use it and to maintain it. Their people are knowledgeable and very helpful and their pricing has always been extremely fair. I would recommend Kinex to anyone as they are very good at what they do!

Dave Hayden, Sunja's Oriental Foods
Waterbury, Vermont, USA

I wanted to thank you and your company for providing Cyberliquids, LLC with a quality product. I purchased the PS-200. It is far superior to any of the products that I have bought in the past. In the past we purchased cheap imported machines and they lasted about 3 months and no longer work anymore. Although the price is more than what I paid in the past, I know the quality and durability of the product is well worth it, and we love the customer service , Thanks Again!

Anthony Garcia, Cyberliquids, LLC.
Brea, California, USA

We love our Kinex capping machine. This wonderful machine has allowed us to increase production and saved our hands from countless blisters caused by hand tightening caps. Just as important, the customer service is outstanding. The one issue we had was handled quickly and every question has been answered quickly and thoroughly. We highly recommend this company and its products.

Amy Furman, MH Labs, LLC
Wyoming, Michigan, USA

We received our PS Capping Machine with Support Stand order in great shape - big thanks for that.

We purchased from the U.S. because we wanted a strong, well-built and well-engineered product. Glad to see you did not fail on any front. We are very pleased with what we have received. On top of that you gave excellent customer service right up to the delivery.

So please let your colleagues know that their work and high engineering standards has been appreciated.

George Ball, Gainland International Ltd.
Flintshire, United Kingdom

We run an assembly and packaging company in California. One of our main accounts is assembling drip irrigation fittings. We were originally assembling these fittings by hand. About 2 years ago, we purchased our first Kinex SA Benchtop Capping Machine. The Kinex Capping Machine instantly doubled our daily production. The Kinex Capper is quick to set-up and allows us to assemble several different size parts without any down time. This has given us a HUGE advantage over our competition. Because of the Kinex Capping Machine’s benefits and reliability, we’ve just purchased another one to add to our collection

Nate Perry, Central Valley Assembly and Packaging, Inc.
Fresno, California, USA

We love the new SA Capping Machine with Foot Pedal Activated Bottle Gripping Base, it's easy to use, took 30 minutes to setup, and saves our wrists! We've used it every day for 3 months and had no trouble at all.

Kinex was great to work with when choosing and ordering a capper. They helped me understand the full operation of the machine. We had an especially high level of torque and Kinex worked with us to determine how to make the machine work with our needs. The people were great to work with and they make a great product!

We look forward to a long productive partnership with Kinex!

David Lovano, Sika – US
Marion, OH, USA

Being a small to medium run contract bottler, we work with many equipment manufacturers and Kinex Cappers is by far one of the best we have worked with. Everyone at Kinex is very knowledgeable of their products; each and every person we have had the pleasure of talking to has been so helpful, making sure all of our questions are answered. We love that Kinex is willing to think outside the box for any custom capping application that we have. We had the pleasure of working with Larry as he designed a custom capper for our bottles with snap on caps (capper works beautifully).

We look forward to a long productive partnership with Kinex!

Olivia Albright, AOA Products, LLC.
Toledo, Ohio, USA

We are a company that specializes in the development and manufacturing of natural products in Indonesia. We manufacture over 100 SKU of our own brand as well as a number of custom products for customers. Our production space is very small and our production runs vary between 100 units to 10,000 + units at a time. Needless to say our change overs in our production have to be quick and the equipment we use needs to work quickly and effectively. We have production equipment that we have sourced from all over the world both cheaply made and very expensive. Capping was always over looked in our production line as it was the simplest task to do. We finally decided it was time to get a capping machine and the hunt began. We found machines that looked the same from $200 up to about $1000. Kinex was always on the higher end of the scale and for such a simple machine that the PS Pneumatic is I could not really get my head around the price. Kinex seemed to have the most attachments and best knowledge on cappers that I could find so I sent them an enquiry. Having many bottles sizes and many liner and chuck options I decided it was best to send them all of my packaging and have them let me know what would be the best set up for us. Shortly after sending my packaging I received an email letting me know what we needed, with a sales order a bit higher than what I was wanting to pay. I instructed accounting to pay the invoice with some hesitation and waited to see what nightmare would show up at our door like has happened so often with so many of our machines. A few weeks later the capper arrived. The machine was neatly packed in several boxes which were clearly marked as well as a very easy to read instruction manual. With my hesitation building and my fear of what problems were to arise from this little capper building I attached it to one of our production benches at lunch followed the instructions for set up to the T and tested it out. To my surprise the thing worked, it did exactly what it said it would do with no fuss, no weird settings no calls to Kinex the thing just worked. I could not believe it and I suddenly found myself sitting in production capping bottle after bottle just to see how fast I could go. This little machine out of all of our production equipment has brought the most joy to my production team. Including the support, options and the fact the thing just works, the machine is well worth the price tag.

Thank you very much no doubt we will be back to buy another machine in some time to cap our pump bottles.

Skyler Grant, Utama Spice
Bali, Indonesia

We are a manufacturer of e-liquids and need to produce around 20,000 bottles a day due to the market growing and the demand for our product increasing like crazy. We invested $120,000 in a machine that filled and capped the bottles automatically. I was promised that this automated machine would only need two people to operate and would be able to produce 20,000-30,000 bottles a day.

Well after a week of using the machine it became very obvious we were sold a pipe dream. The machine was producing 5000 bottles a day; it took 5 people to operate.

I started researching other solutions and found Kinex Cappers. We are now producing 10,000 bottles a day with one $6000 semi automatic filling machine and two $1075 ES-200 Cappers!!!! We are doubling the output of the 120,000 dollar machine. I couldn't believe it!!!! I am now buying one more Kinex Capper and one more semi automatic filling machine. I have learned the old saying, “Keep it Simple Stupid", is the truth. There is no need to over complicate anything and I am amazed at the performance of these capping machines!!! Lost Art Liquids will be a partner of Kinex Cappers till the day we go under!!!!

Brian Worthy, Lost Art Liquids
Los Angeles, California, USA

We have been using Kinex Cappers for many years and despite being Downunder we would have no hesitation in recommending their company and would not look elsewhere. Kinex's service is astounding - 4 days to Australia, helpful friendly advice and products that are of the highest standard. Nice people to deal with.

Bob Bolton, Refresh Waters
Queensland, Australia

The new ES-400 capper is very easy to install and use. We more than doubled our productivity and saved a lot of hands from excessive wear. It was one of the easiest additions at our plant. The machined chucks work great.

The operators at Spectra Group Limited, Inc.
Millbury, OH, USA

A short note to let you all know how delighted our processing team is with our new Kinex Snap Capper.

Although there were Australian units with the same functionality, we were attracted to the simplicity and functionality of the unit you designed for us.

It was also re-assuring to be dealing with a team that showed such enthusiasm as well as competence.

We particularly appreciated the customer service, care and good communications that assured us of a smooth International delivery without hitch.

You may count upon us to be a very satisfied customer.

Robert Armstrong, ALTO OLIVES.
New South Wales, Australia

We have purchased two capping machines from Kinex Cappers. The first was the PS-200 hand held capper which was great and is still in daily use and a good piece of equipment that does exactly what it was designed for. The second capper is the Pump Cap Machine which is excellent for tightening trigger spray caps and is a great piece of equipment to tighten both regular caps and trigger spray caps. The PumpCap has made work simpler for my staff and omits any wrist stress and fatigue when applying trigger spray caps. It is easy to set up and simple to use and can be used by anyone with due care and attention. I can recommend this machine to anyone involved in this type of work as it will improve and speed up production.

Kinex Cappers is a great company to deal with. They are very helpful, will give you the correct advice and guidance for whatever type of capping equipment you will require for your business. They will always keep in contact with you and update you as you progress with them in any business dealings.

If you are filling spray trigger bottles and hand applying the trigger sprays, go to Kinex Cappers and get a PumpCap machine, you will not regret it. It is well worth the investment ! No wrist strain, injury or otherwise just rapid production!

Please feel free to contact us at:
Angelone Contract Fillers
58 Lisburn Road
Glenavy BT29 4NX
Co. Antrim
N. Ireland

Tel : 028 9442 3384
Mail :
Website :

Tony Angelone, Angelone Contract Fillers
Glenavy, N. Ireland

“I have owned and operated an essential oil company for some time. One of the challenges was applying our caps after the bottling process as they have a self locking ring and we could not find a machine to do this. My employees were constantly searching for gloves and a better way to apply the caps. We purchased one of the electric handheld ES Capping Machines with Capper Support Stand and Bench Clamp. The time it saves is incredible. Also, whether we apply 1 or 4,000 caps a day it is exact and perfect every single time. We never have to worry or double check if the caps are on tight enough. The insert that fits in the chuck grabs the plastic caps perfectly and doesn’t damage them in any way regardless of how tight we need them. The capper stops right when it needs to.

Incredibly easy to use, saves enormous amounts of time...why we waited so long to find this is beyond me!!

Thanks so much for making our job more efficient and providing complete ease of mind that it is done right on every bottle.

David Pitcock, Owner, VEO Essential Oils
Russell, KS, USA

We bought a Kinex SA-2000 capper one year ago. It works very well. The customer service from Kinex Cappers is the best I have ever encountered. The people I have dealt with really know their machines and the components.

Pat Murray, Wake Robin Fermented Foods, LLC
Cleveland, Ohio, USA

Our research team is based in Northern NSW Australia. We approached Kinex for a novel solution to an issue of ensuring glass ExetainerTM vials had consistent and perfect cap tension. These vials are pre-evacuated in our laboratory in preparation for Greenhouse Gas sample collection. As such the cap tension needs to be just-so to ensure the rubber septum under the cap is not distorted but is tight enough to retain a vacuum. This task had been done by hand but with a weekly turn-over of several thousand vials an OH&S issue soon developed.

Once approached with my enquiry the team at Kinex enthusiastically responded to the challenge, accepting my offer to send them a number of sample vials to trial on their equipment. Within days of receipt of the sample vials, I received a series of video demonstrations along with a detailed recommendation from the team on which equipment they had trialed and what they believed would be most suitable. We were immediately impressed with their commitment and proceeded to place an order for the recommended capping machine & configuration.

Our SA-1000 pneumatically operated Semi-Automatic Bench-top Capping Machine with dual push button activated bottle gripping base was delivered promptly and in perfect condition. It was incredibly easy to install and calibrate and has now performed faultlessly for over 18months, processing several thousand vials per week with zero failure. We have found consumables – namely white rubber chuck-inserts to be reasonably priced and readily available. There have been no further OH&S incidents and our quality control is assured.

I would have no hesitation in recommending the products and services offered by Kinex Cappers to any individual or organization based on my experience.

John Rust, NSW Department of Primary Industries
New South Wales, Australia

We just run the heck out of our SA Capping Machine and we can’t wreck the thing. It keeps right on going. It’s been a real great little machine. We pack 25000-30000 cases per year.

You guys are wonderful to work with.

Stephen Jordan, Hamel Maple Syrup Co.
Hamel, Minnesota, USA

Superb SA-2000 Benchtop Capper! Superb customer service! Great price! Will definitely be back!

Mike Dirr, Purchasing Director, Niagara Lubricant
Buffalo, NY, USA

Our new PumpCap Capping Machine has been a valuable addition to our production processes. With an extremely high torque application need, this machine was literally a hand saver because our conventional automatic capper couldn’t provide enough torque to sufficiently apply the closure. With the new PumpCap Capping Machine from Kinex Cappers, we are now able to offer additional packaging solutions to our existing and future customers.

The machine itself is very easy to set up and operate. It requires very little training. The customer service provided by Kinex Cappers has been great.

If you are looking for a semi-automatic capper you can’t go wrong with this one.

Andrew McGuire, General Manager, Thornell Corporation
Smithville, Missouri, USA

All of our capping was done by hand and after a complaint from several staff about hand strain, I searched the web for a capping supplier.

I am delighted we found Kinex as your product has allowed us to increase production volumes and remove any complaints from staff about hand strain.

Your staff was attentive and guided us through the process to identify what we needed to assist our operation. Once the order was placed the ES capper arrived quickly and within a day my staff were telling me it was the best piece of equipment we have ever purchased.

Well done to all at Kinex Cappers.

Philip Trinder, DTK Water
Northhampton, United Kingdom

When I came upon Kinex Cappers I was pleased to see that they were a US based company and close to me in New Hampshire.

In a world where many businesses have forgotten what it means to appreciate their customers, they will bowl you over with genuinely great customer service. Everyone I dealt with at Kinex made an effort to understand my business in order to offer me a piece of equipment that could meet my varied capping needs. Kinex was able to build a machine that fit my needs and my budget in less than a week! The craftsmanship and solid engineering in a Kinex machine is impressive. If I had to sum this up in one sentence it would be – “Don’t buy anywhere else.” These are some of the nicest people you will ever encounter, it was a pleasure to work with them. Thanks again for everything!

E. Atherton
Candia, NH, USA

I bought your ES-220 capping machine last year, and am completely happy with the product. It literally saved my hands, we cap thousands of bottles and used to do it all by hand, until I came across your capper.

Very happy customer. Thanks so much.

Mac McGauley, Blacksheep Farm
Nimbin, Australia

The PumpCap Capping Machine is an exceptional machine that we have been using for the past six months. Not only did it meet our high standards, but it exceeded them. Kinex has made an outstanding product that can run at least 800-1000 bottles per hour, without any problems. We love it!

Jim Camerano, Mineral Masters
West Chicago, Illinois, USA

I am the manager for a family owned spring water bottling business near Warm Springs, Georgia. Upon plant start up, we recognized the need for more quality control assurance for our cap tightening. When we explained our challenge to the Kinex staff, they went to great lengths to demonstrate how their PS pneumatic capper was the right application for us before we entered the order. We are very pleased with our installation because it does exactly what we needed.

Nick Cawood, Meriwether White Springs, LLC
Pine Mountain, GA, USA

Just a note to say we received the ES-320 Capper and it's working great. I'm really pleased with it and it's made the job a lot easier and faster. Thanks for the great service and speedy delivery.

Hamish Fyfe, AKS Products
Dunedin, New Zealand

Our SA-2000 Kinex Capper has been a real workhorse. After torquing 100,000 caps a year for the past seven years, I would expect to see some wear. But the machine is still as mechanically sound as the day we bought it.

Tim Cole, Artel
Westbrook, Maine, USA

Our SA Capping Machine arrived today and we were positively surprised by the finished quality ( what a welding post !!! ), it works brilliant, is easy to use and it is just what we need to have in our production. Thank you, it is always nice to work with professionals like you and your team. We do have many visitors from Finnish food industry, and I will tell them about your company and how flexible it is to deal with you.

Reima Rönnqvist, Oy MakuNuotta Ab

We have been using our PS-200 Capping Machine since August of 2012 and we love it. We average 3000 bottles a week; pint, quart and gallon. We like how easy it is to adjust and set the torque. Thank you for your excellent support and we highly recommend your products.

Charlie Robinson, ArroChem, Inc.
Mt. Holly, NC USA

We are very impressed with the ES-420 capping machine and your customer service in general, it is already installed on our production line and making an impact. I can see us getting some fairly significant increases in production fairly soon. Thanks again, Kinex was a pleasure to do business with!

Cheyne Jones, Centuries Ahead Pty Ltd
Queensland, Australia

You guys are a joy to deal with , a model of efficiency and professionalism, with great products, and it just fills me with confidence each time one of those expertly wrapped parcels arrives. Keep doing what you’re doing!

Pete Arguile, Liquid Solutions
Abingdon, United Kingdom

I just wanted to drop you a note to tell you thanks. The PS Capping Machines are outstanding and the support your team provided was just as stellar. Tell your folks how great they are for producing such a great product.Donnie Freeman, Syngenta
St. Gabriel, Louisiana, USA

We were looking for an economical bench-top machine for screwing pharmaceutical closures onto bottles and suitable for use in both a laboratory and a clinical manufacturing environment. The Kinex SA-2000 has proven to be the perfect solution. It is easy to use, reliable and robust.

The customer support provided by Kinex is to be commended.

Peter Watts, Archimedes Development
Nottingham, United Kingdom

We have been using your SA Tabletop capper for 7 years now and are extremely pleased with its performance and reliability. Aside from following routine maintenance recommendations and liner replacements we have not incurred any downtime in production and the equipment looks and works as it did when we first bought it.

I highly recommend your fabulous "Made in the USA" Kinex equipment! You have in my opinion the best products in the industry.

Rob Chaput, Swirl-Away
Garson, Ontario, Canada

The service and support Kinex Cappers provided when we purchased the ES Table Top Capper with Lever Activated Base was outstanding. They are knowledgeable about their products and applications and are dedicated to finding the perfect solution for their customers. The input they provided helped our process go that much smoother

Nancy Wilson, HQC Incorporated
Oswego, Illinois, USA

We purchased a Kinex ES Capping Machine in July of 2009. It has since been in use 1-2 days per week, capping some 1500-2000 vials per day. The machine is still in excellent working condition, even after being used to cap almost 2,000,000 vials.

Tony Bebbington, Bebbington Industries
Dartmouth, Nova Scotia, Canada

We are very happy with our SA-2000 Capping Machines. They have been a great improvement to what we have used in the past and your fast and efficient shipping service is second to none. Your machines are reliable and tighten each of our many different cap sizes perfectly. Keep going strong.Oded Lotan, Anna Lotan Ltd
Or Akiva, Israel

Our Jelly Making consisted of an automatic filling machine and semi-automatic labeling machine. Capping was the bottleneck. After installing a Kinex capper, our manpower load was equalized. We reduced labor by 0.15 man hours per case by eliminating the tedious task of hand capping. We are able to rotate our laborers at will among the different jobs, resulting in a more harmonious atmosphere.

I estimate that the Kinex Capper paid off itself in less than 2 months. I wish I knew earlier that this machine existed. It changed my business.

Charles Hutchins, Owner of Springhill Jelly
Pollock, Louisiana,USA

We have purchased multiple SA-1000 capping machines from Kinex Cappers and have been extremely happy with both the product and the service. The machines have proved reliable and do exactly as they are described. Despite being on the other side of the world the Kinex team has always been approachable, practical, helpful and quick to respond. As we grow, we will be more than happy to purchase more capping machines from Kinex.

Andrew Holmes, Neogen Europe Ltd.
Scotland, United Kingdom

I would like to thank you for your support in my purchase of my SA-2010 capping machine. I can honestly say you have been the best company I have ever dealt with from my very first contact I made with you -- absolutely unbelievable the support service advice -- the total package -- could not ask for any more -- well done.

Mick Labbozzetta, Kyneton Olive Oil
Victoria, Australia

Thank you so very much for the speedy repair of our unit and for the wonderful customer service you have provided me.

It has been a pleasure doing business with you. Every interaction with you has been a warm, friendly and professional one which made me feel like I was your number one customer thank you so much. There are not too many companies that give excellent customer service these days so when I do experience it I think it only right that it should be acknowledged.

I look forward to doing more business with you in the future and if I get an opportunity I will certainly be recommending you.

Thank you again for all your effort.


Ivor Malin, Pharmaceutics International, Inc.
Hunt Valley, Maryland, USA

I work in a Correctional Hospital Pharmacy setting. In our unique environment, we dispense between 200-1,000 bottles per day. A few years ago we purchased the ES300 Capper which has increased our productivity and consistency with securing bottle caps. We have been extremely happy with this device.

David Bergeron, Pacific Regional Pharmacy, Government of Canada
Abbotsford, British Columbia, Canada

We are a leading company specializing in high quality, small-scale liquid processing equipment for laboratory & pilot applications. One of our specialties is the manufacture of Hygienic and Aseptic Filling machines. Kinex offers excellent capping machines which we frequently provide with our filling machines to customers with hygienic environments. The machines are very fast and accurate and close a large range of caps. The delivery times are quick and always on time. These factors, together with their very responsive employees, make it a pleasure to work with Kinex.

Patrick Hoogendoorn, OMVE Netherlands B.V.
The Netherlands

We would like to order another Kinex Capper. The original SA-1000 is working great, used daily and is a much adored piece of machinery.

Bob Cudney, Hampton Research
Aliso Viejo, California USA

We have been using the Kinex SA Capping Machine for almost two months now in a very demanding and time limited working environment where every minute lost because of production disruptions could be the cause of our company losing a big contract with an important customer. During this stressful time, the SA Capping machine’s operational behavior was more than excellent. It proved itself worthy of every single dollar spent in this purchase!!

I highly recommend the Kinex SA Capping Machine model. It is undoubtedly trustworthy and value-adding (which is the most important thing at the end of the day.)

Dimitris Kokkinos, Safe n Beautiful PC
Athens, Greece