Semi-Automatic Bench-Top Capping Machines

304 Stainless Steel and
Anodized Aluminum Construction

SA™ Semi-Automatic Bench-Top Capping Machines were designed to eliminate the strain and fatigue associated with hand capping. Extremely ergonomic and comfortable, SA Bench-Top Capping Machines are very easy to use.

How It works

Simply place the bottle to be capped into the V-Block on the base of the machine and depress the foot pedal. This activates the machine to bring the capping motor down onto the cap, tighten the cap to the pre-set torque, then lift the capping motor back to its initial position ready for the next container.

SA™ Capping Machines feature an adjustable automatic-shut-off clutch, which offers excellent torque accuracy and repeatability. The clutch is easily adjusted by rotating an external dial with your fingers; the torque range is from 2 inch.lbs. - 125 inch.lbs. When the cap reaches the pre-set torque, the clutch signals the motor to shut off, and the machine lifts up off of the cap.

SA™ Semi-Automatic Cappers are air operated. They include an integrated lubricator/filter/regulator to ensure the machine receives clean, well lubricated air at the correct air pressure.

> Pricing

> Specifications

> Ready to ship

Designed with the end user in mind;
all adjustments and change-over activities are performed without the use of tools.

> Need to tighten small caps? Our SA™ 1000 Series Capping Machines can handle your small cap requirements, applying as little as 2 inch.lbs. of torque.

> Need to tighten a large cap? Featuring an extremely powerful motor and special gearing, our SA-2000 Series Capping Machines are designed to handle caps up to 130 mm with ease.

> Capping in a clean, sterile or controlled environment?

Operating Features:

• Tightens caps from 10mm to 130mm.
• Torque range: 2 - 125 inch.lbs.
• Capping speed - 30 caps per minute.
• External torque adjustment dial.
• Integrated lubricator/filter/regulator
• Reversible - can be used as a de-capper
• Easy to set up, easy to use.
• No Tools Required! All adjustments are made by turning knobs and dials.
• Quick change chuck

Control and Adjustment Features:

• Dedicated regulator/filter adjusts the downward force the capping motor (with chuck attached) exerts on the cap.
• Integrated flow controls adjust the speed with which the capping head comes down onto the cap and bottle.
• External torque adjustment dial
• Height adjustment by turning hand wheel.
• V-Block bottle centering device (Available in two sizes; flat for short containers and raised for tall containers)
• Forward / reverse switch

Ergonomic Features:

• Quiet operation - 78dBA
• Anti-rotation base makes holding the container strain free