
LS Capping Machine with optional
PST-100 Capper Support Stand
The LS™ 100 cap tightener, our least expensive bottle capper, tightens screw and lug caps from 24 mm to 83 mm in diameter. This capper features an external torque dial that makes changing the torque fast and simple with consistent results.
How It works
LS™ capping machines operate in the following way. The operator lowers the chuck onto the cap to be tightened. The operator then depresses the lever with their thumb or fingers to start the capping machine which will quickly tighten the cap onto the container. When the cap reaches the pre set torque, the operator will hear the clutch slipping and will see the chuck has stopped rotating on top of the cap. This signals the operator to release the lever and move on to the next cap.
While the LS-100 is a good capping machine that is far superior to others in its price class, it does not provide the excellent torque accuracy as well as the many ergonomic advantages that our PS Series Pneumatic hand held capping machines offer.

LS Capping Machine being used without
the optional PST-100 Capper
Support Stand
Operating Features:
- External Torque adjustment dial - makes adjusting torque simple.
- Lever Start
- Tightens caps from 24mm to 83mm
- Torque range from 14 - 70 inch.lbs
- Good torque accuracy
- Capper/Decapper
- Easy to setup, easy to use
- Quick change chuck
- Quiet operation
Home | FAQ | Order Form | Contact Us

We also accept payment through PayPal.
Kinex Cappers™ LLC
13 Columbia Dr, Unit 4 · Amherst, NH 03031
Toll Free 1-888-295-5202 or (603)
883-2400
fax: (603) 883-2442 · email:
info@kinexcappers.com
Brand names, i.e. KINEX, ES, PS, LS, SA, Cap-Rite, Power Cap and Kintetic are trademarks and/or service marks of Kinex Cappers, LLC.
(C) 2006-2008 Kinex Cappers, LLC
All rights reserved. The text and photographs contained in this material are copyright protected and may not be copied or reproduced, in whole or in part, without the express written consent of Kinex Cappers™, LLC.