Kinetic Bottle Capper
Choose the Correct Model
Totally Enclosed Models - If the environment you will be capping in is moist, dusty, or dirty, the Totally Enclosed model is built with such conditions in mind.
Two Speed Models - Two speed models are recommended for use with very small caps, less than 18mm in diameter, or larger caps, greater than 63mm in diameter. These models have two speed settings, the slower of which is ideal for use with either very small or very large caps.
Available in the Following Voltages & Frequencies
- 110 ~ 120 volt / 60 Hz. AC
- 110 ~ 120 volt / 50 Hz. AC
- 220 ~ 240 volt / 50 Hz. AC
- 220 ~ 240 volt / 60 Hz. AC
Choosing the Correct Chucks and Liners
Kinetic Capping Machines operate differently than our other capping
machines, the links below should be referred to only if you will be
using chucks and liners with a Kinetic Capping Machine. To learn more
about and select chucks and liners for all other capping machines,
please click here.
> About Chucks for Kinetic Capping Machines
> About Liners for Kinetic Capping Machines
> Chuck and Liner Selection Chart for Kinetic Capping Machines
Voltages (V) and Frequencies
|Models & Prices||115V 60Hz||230v 60Hz||115v 50Hz||230v 50Hzh|